Redline Communications RDL-2000 Bedienungsanleitung PDF herunterladen (Seite 49)

RDL-2000 User Manual

[192.168.25.2] >>:rssi

rssi -59 [dBm]

snmp community [name]

View or set the snmp set community name.

name - Enter up to 30 characters.

snmp trap [row] [on|off] [target] [comm] [port]

View or set snmp trap destinations.

row - Enter row number (1-4). If omitted, all active traps are displayed. If this is

the only argument, the specified row is displayed.

off - enable SNMP traps to be sent.

on - Do not send SNMP trap messages.

target - IP address of this trap listener. Specify IP address as a hexadecimal

string.

For example, IP 10.1.1.1 == 0a010101, or IP 192.168.20.12 == C0A8140C.

comm - SNMP community associated with this trap listener.

port - Destination port address of this trap listener.

sweep <start | stop> <all | channel(s)>

Perform an RF scan for interference. No user data is transmitted over the

wireless link while this test is running. A reboot is required to restore normal

operation.

Start: Begin scanning the selected channels. The wireless link is offline.

Stop: Stop scanning channels. Reboot and resume normal operation.

all: Scan all available channels

channel(s): Enter one or more RF channel frequencies to be scanned.

Example: Scan all enabled channels:

[192.168.25.2] >>:sweep start all

RF Analyzer: CH = #1 rssi = -77 dBm

RF Analyzer: CH = #2 rssi = -78 dBm

RF Analyzer: CH = #3 rssi = -48 dBm

switchbank [soft | pld | both]

Switch between the active and inactive banks of the software. A system reboot is

required to activate the selected software version.

soft or [blank]: Switch the software load.

pld: Switch the firmware load (e.g., bootloader).

both: Switch the software and firmware load.

Example: Switch to the alternate software load and reboot:

[192.168.25.2] >>: switchbank

update

Activate and permanently save (non volatile RAM) all changes to the system

parameters. Saving changes to some parameters will automatically reset the

RDL-2000.

Example: Activate and save all parameter changes:

[192.168.25.2] >>: update

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 44 45 46 47 48 49 50 51

Kommentare zu diesen Handbüchern

Keine Kommentare

Redline Communications RDL-2000 Bedienungsanleitung Seite 49

Kommentare zu diesen Handbüchern