Redline Communications RDL-2000 Bedienungsanleitung PDF herunterladen (Seite 42)

RDL-2000 User Manual

4 Troubleshooting

4.1 System Reset Issues

The following table lists causes that may be logged in the Reset Text description. This

description includes the duration of uptime (seconds) since the previous reboot.

Table 5: Maintenance - Reset Text

DFS Detected

Master detected DFS.

DFS Detected by SU

Master received DFS detection message from Slave

and switched channel.

Link type changed

Change mode between Master/Slave.

Reset text cleared by PC

Link Manager has sent command to clear the Reset

Text field (Action->Clear Reset Text).

Reset text corrupted

The RDL-2000 has been power cycled.

Resetting the unit to perform ACS

User selected Perform ACS.

Scan stopped

Spectrum sweep stopped by operator.

Scanning watchdog expired

Slave will reboot automatically every three minutes

while in scanning mode (searching for Master).

Signal lost

Slave has switched to scanning mode.

Telnet reset command

Reset command from Telnet.

The unit will perform a (normal) reset when the following operating parameters are

modified:

Table 6: Maintenance - Causes of System Reboot

Operation

Cause(s)

AES mode

Operator action

Channel

Operator action

, license file

, DFS action

Channel BW

Operator action

, license file

DFS mode

Operator action

, license file

MIMO mode

Operator action

MU ID

Operator action

RF Band

Operator action

, license file

Fixed Frame Mode

Operator action

1. Operator has changed a parameter setting.

2. Operator has loaded a new license file.

3. DFS action has changed channel.

Chapter 4

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 50 51

Kommentare zu diesen Handbüchern

Keine Kommentare

Redline Communications RDL-2000 Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern