Redline Communications RDL-2000 Bedienungsanleitung PDF herunterladen (Seite 30)

RDL-2000 User Manual

3.6 Link Configuration Screen

Use this screen to configure advanced features including encryption and channel size.

This screen is displayed only when a session is active to the RDL-2000. The information

displayed is different for the Master and Slave.

Figure 17: Link Mgr - Link Configuration Screen - Master

Figure 18: Link Mgr - Link Configuration Screen - Slave

MU ID: (Master only) Enter the identification number for this wireless link. Identical

settings must be used on the Master and Slave.

A wireless link can be established only between pairs of RDL-2000 systems having ID

identical settings. This feature ensures that following power-up and reboot, or a DFS

event, the wireless link will be established only between designated pairs of RDL-2000

units.

For the Slave link ID setting, refer to section 3.4: Installation Screen - Basic on page 24.

Channel: (Master only) Select the center frequency for the RF channel. This field is

active only when ACS is disabled. Identical settings must be used on the Master and

Slave.

SU MAC Address: (Master only) Enter the MAC address of the Slave. The Master will

only establish a wireless connection with the RDL-2000 deveice having this MAC

address.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 50 51

Keine Kommentare

Redline Communications RDL-2000 Bedienungsanleitung Seite 30