Redline Communications AN-50e Bedienungsanleitung PDF herunterladen (Seite 98)

& User

AN-80i

Manual

Chapter

This section provides basic diagnostic and troubleshooting procedures to help solve

problems that may occur with the system. If the system is not operating correctly after

applying the suggestions in this section, please contact your local Redline

representative. Include the model name and serial number of the system in your

communications.

6.1 Factory Default Settings

The following parameters are the factory default settings for the AN-80i.

Table 38: Diag. - Factory Default Settings

Section Item Factory Default Setting

System User Name admin

Password admin

Ethernet IP Address 192.168.25.2

Subnet Mask 255.255.255.0

Gateway 0.0.0.0

Wireless RF Channel Set by factory key.

Tx power 14 dBm

Encryption Enabled / no key

Note: Factory defaults can only be restored using the CLI 'save' command.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 127 128

Keine Kommentare

Redline Communications AN-50e Bedienungsanleitung Seite 98